1.1 Output: Continuous current 40A, working current at 50A can last over 1 minute,burst current 60A.
1.2 Input: 4-12 cells NiMh/NiCd or 2-4 cells LiPo. (Note)
1.3 BEC Output: 6V/1A.
1.4 Resistance: 0.0006 Ohm.
1.5 Motor Supported: Sensored brushless / Sensorless Brushless / Brushed
1.6 Suitable Brushless Motor: 5.5T and >5.5T
1.7 Suitable Car: 1/10, 1/12 on-road or off-road cars / trucks for normal race.(Great power for 2S lipo battery)
1.8 Size: 31.5mm(L) * 27.5mm(W) * 24mm(H).
1.9 Weight: 30g(Without wires)
For brushless motor, the ESC supports up to 12 cell NiMh/NiCd (or 4 cell Lipo) input; While for brushed motor, the ESC only supports up to 6 cell NiMh/NiCd (or 2 cell Lipo) input.
For 4-6 Cell Ni-xx: You needn't change the fan coming with the ESC;
For 7-9 Cell Ni-xx: You must change the fan because it cannot work with such a high voltage, so please choose a high voltage fan or supply the fan from the receiver (+6V);
For 10-12 Cell Ni-xx: You must choose a high voltage fan, and cut the output of the built-in BEC, then supply the receiver with an UBEC (An additional external DC-DC regulator);